- Other Part Number: Racor 120AT
- Placement on Vehicle: Fuel Inlet
- Country/Region of Manufacture: CN
- Interchange Part Number: 120AT
- Special Features: fuel water separator
- Material Type: Aluminum
- Item Weight: 580g
- Item Height: 16CM
- Item Width: 8.5CM
- Item Length: 8CM
- Manufacturer Part Number: XL-F-R12T-NEW
- Brand Name: iFJF
- Origin: Mainland China
- OEM NO.: Racor 140R 120AT
1.Fuel Water Separating Filter fit 3/8 Inch NPT Outboard Motors as well.
2.Maximum Flow Rate 15 GPH (57 LPH).
3.Port / Connecting Size M18 X 1.5 Center Thread.
4.These are more suited to compact off road diesel equipment:tractors,skid steers loaders,movers.
5.Filter Rating 10 Micron.10 micron filters are over 90% efficient at removing particles as small as 10 microns. 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems, Designed to trap the smallest particles and emulsified water from Diesel.
Note: Please recognize the IFJF brand as the quality assurance of the platform certification
R12T water separator and filter complete combo installation instruction:
1.Nylon collection bowl down when installed the water separator and filter.
2.This filter has four ports, two inputs and two outputs. We provide two plugs for the extra two ports. If you need to use two plugs, you must install them to the filter and tighten them.
3.Before installing the filter, you have to remove those plugs, teflon-tape them, and re-install them.Prevent leaks from these plugs.
4.All of the above steps are very simple to operate, you can manually disassemble, and then use the tool to install tighten.